View GS-12-0903_4769923.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 1 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. product specification 10 gbd sfp+ 850 nm li miting transceiver trx10gvp2010c1 product features: hot pluggable sfp+ optical transceiver programmable input and output equalizers data rate transparent from 9.95 to 11.3 gbps low power consumption, 0.55 w typ. excellent emi performance transmission distance up to 300 m om3 mmf 0 c to +70 c case operating temperature 850 nm vcsel laser duplex lc connector laser class 1 rohs 6/6 compliant applications : 10g ethernet 10gbase-sr/sw 10g fibre channel 1200-mx-sn-i fci?s sfp+ optical transceiver trx10gvp2010c1 is compliant with the sfp+ msa specifications (sff-8431 and sff-8432) and with 10gbase-sr/sw per ieee 802.3 as well as 1200-mx-sn-i per 10g fibre channel. it is rohs 6/6 compliant per directive 2002/95/ec and laser class 1 safety compliant per iec/cdrh. the sub- watt power consumption and the excellent emi performance allow system design with high port density. adjustable input and output equalizers allow to overcome host board high frequency signal loss and to optimize module performance in interaction with host board equalizers. supported standards application standard data rate 10g ethernet lan/wan ieee 802.3 10gbase-sr/sw 10.312 / 9.953 gbps 10g fibre channel 1200-mx-sn-i 10.518 gbps pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 2 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. table of contents table of contents ............................................................................................................. ............................ 2 functional description ........................................................................................................ ......................... 3 electrical characteristics .................................................................................................... ......................... 4 absolute maximum ratings ...................................................................................................... ................... 4 recommended operating conditions .......................................................................................................... 4 low speed characteristics ..................................................................................................... ..................... 4 sfi module transmitter input characteristics .............................................................................................. 5 sfi module receiver output characteristics .................................................................................... ........... 5 optical characteristics ....................................................................................................... .......................... 6 general parameters ............................................................................................................ ........................ 6 optical transmitter ........................................................................................................... ........................... 6 optical receiver .............................................................................................................. ............................ 6 application information ....................................................................................................... ......................... 7 connector pinout............................................................................................................... .......................... 7 electrical pin definition ..................................................................................................... ........................... 7 application schematics ........................................................................................................ ....................... 8 interfacing the transceiver ................................................................................................... ....................... 9 digital optical monitoring .................................................................................................... ........................ 9 tx input & rx output equalizer adjustment ..................................................................................... ......... 10 programmability feature code .................................................................................................. ................ 11 passcode entry and modification ............................................................................................... ............... 11 module outline ................................................................................................................ .......................... 12 module safety & compliance .................................................................................................... ................. 13 esd & electromagnetic compatibility ....................................................................................................... 13 eye safety .................................................................................................................... ............................... 14 ordering information .......................................................................................................... ........................ 15 pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 3 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. functional description the transmit path is based on an ac coupled 100 ohm differentially terminated driver coupled to an 850 nm vcsel. laser output may be disabled by pulling the transmitter disable (tx_dis) line high which is its default state when leaving the input floating due to an internal pull-up resistor. a fault condition is raised upon detection of an abnormal laser state. the receive path consists of a receiver optical sub-assembly (rosa) for optical to electrical conversion, followed by a limiting amplifier boosting the electrical signal. a loss of signal (los) status line provides information to facilitate easy link detection. complete digital optical monitoring is implemented in compliance to sff-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 4 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. electrical characteristics absolute maxi mum ratings rating conditions symbol min max units storage ambient temperature ? stg -40 +85 c powered case temperature ? c 0 +75 c operating relative humidity non condensing rh 0 95 % supply voltage range v cct/r -0.5 4.0 v any stress beyond the maximum ratings may result in permanent damage to the device. specifications are guaranteed only under recommended operating conditions. recommended oper ating conditions parameter conditions symbol min typ max units operating case temperature ? case 0 +70 c power supply voltage v cct/r 3.135 3.30 3.465 v dc common mode voltage sfi signals v cm -0.5 4.0 v low speed characteristics parameter conditions symbol min typ max units supply current transmitter @ v cct i vcctx 100 ma supply current receiver @ v ccr i vccrx 120 ma power consumption 0.55 0.75 w tx_fault, rx_los host vcc range 2 v ? 3.47 v, i ol_max = 4 ma v ol 0 0.4 v v oh host_ vcc ? 0.5 host_ vcc + 0.3 tx_dis, rs0, rs1 low voltage ttl v il -0.3 0.8 v ih 2.0 vcct + 0.5 scl, sda host vcc range 3.13 v ? 3.47 v, i ol_max = 4 ma v il -0.3 vcct * 0.3 v ih vcct * 0.7 vcct + 0.5 v ol 0.0 0.4 v oh host_ vcc ? 0.5 host_ vcc + 0.3 pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 5 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. sfi module transmitter input characteristics parameter conditions symbol min typ max units nominal data rate 10.3125 gbd reference differential input impedance z d 100 ? input ac common mode input voltage 0 25 mv (rms) differential input voltage swing 2 x |v(td+) ? v(td-)| v id 150 900 mv differential input s-parameter 0.01 ? 4.1 ghz sdd11 1 ) db 4.1 ? 11.1 ghz 2 ) db differential to common mode conversion 3 ) 0.01 ? 11.1 ghz scd11 -10 db total jitter tj 0.28 ui(p-p) data dependent jitter ddj 0.1 ui(p-p) uncorrelated jitter uj 0.023 rms 1) reflection coefficient given by equation sdd11(db) < -12 + 2 x sqrt(f), with f in ghz. 2) reflection coefficient given by equation sdd11(db) < -6.3 + 13 x log10(f/5.5), with f in ghz. 3) common mode reference impedance is 25 ? . sfi module receiver out put characteristics parameter conditions symbol min typ max units nominal data rate 10.3125 gbd reference differential output impedance z d 100 ? termination mismatch ? z d 5 % output ac common mode voltage 7.5 mv (rms) differential output amplitude r load = 100 ohm, 2 x |v(rd+) ? v(rd-)| v ospp 350 520 800 mv output rise and fall time 20 % to 80 % t r , t f 28 ps differential output s-parameter 0.01 ? 4.1 ghz sdd22 1 ) db 4.1 ? 11.1 ghz 2 ) db common mode output return loss 4 ) 0.01 ? 2.5 ghz scc22 3 ) db 2.5 ? 11.1 ghz -3 db deterministic jitter dj 0.42 ui(p-p) total jitter see sfp+ msa tj 0.7 ui(p-p) 1) reflection coefficient given by equation sdd22(db) < -12 + 2 x sqrt(f), with f in ghz. 2) reflection coefficient given by equation sdd22(db) < -6.3 + 13 x log10(f/5.5), with f in ghz. 3) reflection coefficient given by equation scc22(db) = -7 + 1.6 x f, with f in ghz 4) common mode reference impedance is 25 ? . pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 6 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. optical characteristics general parameters parameter conditions min modal bandwidth (mhz*km) symbol min typical 1gbd typical 10gbd units operating range 62.5 m mmf 50 m mmf 62.5 m mmf 50 m mmf 50 m mmf 160 400 200 500 2000 l op 2 2 0.5 0.5 0.5 220 500 275 550 x 26 66 33 82 300 m optical transmitter parameter conditions symbol min typ max units center wavelength trp 840 850 860 nm rms spectral width ? 0.45 nm average launch power p avg -7.3 -1 dbm optical modulation amplitude p oma -2.9 dbm extinction ratio er 3.5 db relative intensity noise rin -128 db/hz optical receiver parameter conditions symbol min typ max units center wavelength c 840 850 860 nm maximum average input power p max -1 dbm receiver sensitivity prbs 2 31 -1, ber < 1*10 -12 @10.3125gbd p in(oma) -15 -12 dbm stressed receiver sensitivity prbs 2 31 -1, ber < 1*10 -12 @ 10.3125gbd p in(oma) -11 -8 dbm loss of signal assert p avg_as -30 -19 dbm de-assert p oma_deas -17 -13 loss of signal hysteresis hyst 1 db note: the specified characteristics are met within the recommended range of operating. unless otherwise noted, typical data are quoted at nominal voltages and +25c ambient temperature. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 7 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. application information connector pinout electrical pin definition pin logic symbol name / description note 1 veet module transmitter ground 1 2 lvttl-o tx_fault module transmitter fault 3 lvttl-i tx_dis transmitter disable; turns off transmitter laser output 4 lvttl-i/o sda 2-wire serial interface data line 2 5 lvttl-i scl 2-wire serial interface clock 2 6 mod_abs (=mod_def0) module absent, shorted to module ground 7 lvttl-i rs0 receiver rate select 8 lvttl-o rx_los receiver loss of signal indication active low 9 lvttl-i rs1 transmitter rate select 10 veer module receiver ground 1 11 veer module receiver ground 1 12 cml-o rd- receiver inve rted data output 13 cml-o rd+ receiver data output 14 veer module receiver ground 1 15 vccr module receiver 3.3 v supply 16 vcct module transmitter 3.3 v supply 17 veet module transmitter ground 1 18 cml-i td+ transmitter non-inverted data input 19 cml-i td- transmitter inverted data input 20 veet module transmitter ground 1 1. module ground pins vee are isolated from the module case. 2. shall be pulled up with 1k-10k ohms to a voltage between 3.13 v and 3.47 v on the host board. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 8 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. application schematics recommended electrical connections to transceiver are shown below. pull-ups: 1k ? 10k ohms. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 9 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. interfacing the transceiver communication is done by a serial 2-wire interface compatible to the i2c bus protocol. refer to sff-8472 for a more detailed explanation of the registers: base address a0h register content 0 - 95 serial transceiver id as defined in sfp msa 96 - 127 fci specific 128 - 255 reserved digital optical monitoring the transceiver offers the ability to monitor important module parameter during operation. all five parameters listed below are continuously monitored for getting information about the current module status. all data is calibrated internally; there is no need for external post processing. temperature internally measured temperature data is represented as two?s complement of a signed 16-bit value in increments of 1/256 c over a range of -40 to +100 c. accuracy is better than +/-3 c. supply voltage (vcc) internally measured supply voltage. represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 ? 65535) with lsb equal to 100 volt, which yields to a total range of 0 to +6.55 volts. accuracy is better than +/-3 %. laser bias current the vcsel bias current is represented as a 16 bit unsigned integer with the current defined as the full 16-bit value (0 ? 65535) with lsb equal to 2 a. accuracy is better than +/-10 %. optical transmitter power tx output power measurement is based on internal monitor diode feedback. represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 ? 65535) with lsb equal to 0.1 w. accuracy is better than +/-3 db over a range of pavg min to pavg max . base address a2h register content 0 - 55 alarm & warnings thresholds & limits 56 - 95 external calibration constants (not used) 96 ? 119 values from real time diagnostic monitoring 120(lsb) ? 123(msb) passcode change field 124(lsb) ? 127(msb) passcode entry field 128 ? 247 customer specific, writable area 248 input & output equalizer settings 249 - 253 reserved 254 feature code 255 reserved pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 10 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. receiver optical power rx input power measurement is based on photodi ode average current. represent ed as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 ? 65535) with lsb equal to 0.1 w. accuracy is better than +/-3 db over a range of -12 dbm to -1 dbm. note: the specified characteristics are met within the recommended range of operating conditions regarding temperature and volt age. tx input & rx output equalizer adjustment the transceiver is equipped with equalizers at the transmitter input and at the receiver output (at the electrical module interface) to compensate for high frequency signal loss on the host board printed circuit board (host-pcb) into which the transceiver is plugged and to allow performance optimization in interaction with host board equalizers (if there are any). there are different module equalizer settings available to adjust the strength of the equalization which may be selected according to the line length of host-pcb signal tracks. msb content of register 248 in table a2h lsb reserved tx2 tx1 tx0 reserved rx2 rx1 rx0 register 248 is always re adable, but only writable if a valid passcode has been written to registers 124 ? 127 of table a2h before (see paragraph passcode entry and modification below). reserved bits of register 248 should be written to 0. after power up, the module al ways comes up with its factory programmed default equalizer settings. transmitter input signal equalizer settings: tx2 tx1 tx0 description 0 x x input equalizer off 1 0 0 low equalization 1 0 1 reserved 1 1 0 default equalization (factory setting) 1 1 1 reserved x: don?t care receiver output signal equalizer (peaking) settings: rx2 rx1 rx0 description 0 0 0 output peaking off 0 0 1 lowest peaking ? increased peaking between 001 up to 111 1 1 1 strongest peaking factory setting (default) will be 0 or 1. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 11 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. programmability feature code register 254 of table a2h indicates the programmability features availabl e and an implementation code to distinguish different implementations. this is a read only register. msb content of register 254 in table a2h lsb tx equal. rx equal. reserved reserved reserved i-code2 i-code1 i-code0 tx equal.: is set to 1 if the transceiver supports programming of the tx equalizer. rx equal.: is set to 1 if the transceiver supports programming of the rx equalizer. i-code2?0: implementation code. passcode entry an d modification write-access to the transceiver programmability features and to the customer specific writable area (128 ? 247 of table a2h) is granted via a valid passcode which has to be written to the passcode entry field (registers 124-127 of tabl e a2h). please contact fci for the factory preset initial passcode. the passcode may be changed to a proprietary one by entering the new one into the pa sscode change field (registers 120- 123 of table a2h) after a valid passcode has been written to the passcode entry field. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 12 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. module outline all dimensions shown are in millimeters. pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 13 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. module safety & compliance fci?s sfp+ sr module is designed to meet international standards and requirements. the module is rohs compliant according to the european parliament requirements on the restriction of the use of hazardous substances in electrical and electronic equipment (rohs). the module optical output power meets class 1 requirements for laser safety. requirements standard module safety iec 60950-1:2001 en 60950-1:2001 rohs compliance rohs 6/6 directive 2002/95/ec amendment 4054 (2005/747/ec) laser safety (class 1) cdrh 21 cfr 1040.10 and 1040.11 (according fda) iec 60825-1 rev2 2007 (according iec) esd & electromagnetic compatibility requirements standard value emi (emission) fcc part 15 b en 55022 class b cispr 22 30 mhz ? 40 ghz at least 6 db margin to class b limit emi (immunity) iec 61000-4-3, 10 mhz ? 1 ghz no bit errors at sensitivity limit esd (electrical connector) eia/jesd22-a114-b mil-std 883c method 3015.7 2 kv 1 kv (sfi signals) esd (module case) air discharge en61000-4-2, criterion b 15 kv esd (module case) contact discharge en61000-4-2, criterion b 8 kv pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 14 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. eye safety this laser based multimode transceiver is a class 1 product. it complies with iec 60825-1 edition 2 and fda performance standards for laser products (21 cfr 1040.10 and 1040.11) except for deviations pursuant to laser notice 50, dated july 26, 2001. class 1 laser product to meet laser safety requirements the transceiver sh all be operated within the absolute maximum ratings. note: all adjustments have been made at the factory prior to shipment of the devices. no maintenance or alteration to the device is required. tampering with or modifying the performance of the device will result in voided product warranty. failure to adhere to the above restrictions could result in a modification that is considered an act of ?manufacturing?, and will require, un der law, recertification of the modified product with the u.s. food and drug administration (ref. 21 cfr 1040.10 (i)). wavelength >840 nm accessible emission limit (as defined by iec: 7 mm aperture at 70 mm distance) <743 w product to p view rx tx laser e mission pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 15 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. ordering information application standard part number 10g ethernet lan/wan ieee 802.3 10gbase-sr/sw trx10gvp2010c1 10g fibre channel 10gfc 1200-mx-sn-i trx10gvp2010c1 pds: rev :b status:released printed: apr 05, 2012
number GS-12-0903 type product specification title page revision trx10gvp2010c1 (sfp+ sr module) 16 of 16 b authorized b y date j. blank 29 july 2011 classification unrestricted copyright ? 2011 fci deutschland gmbh. fci deutschland gmbh reserves the right to make changes to this document at any time wit hout notice. information in this document is believed to be reliable. however, no responsibility is assumed for possible inaccuracy or omiss ion. revision record rev page description ec# date a initial version. 2 mar. 2011 b changed formatting, content. ecn-elx-v- 004446-1 29 jul. 2011 pds: rev :b status:released printed: apr 05, 2012

▲Up To Search▲

Price & Availability of GS-12-0903

	To Download GS-12-0903 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .